Great experience with Jammie. He was fantastic from the first call. … He was on time, polite and professional. And I am very happy with the result. Other electrician had a hard time figuring out the problem but Jammie was able to fix it. Highly recommend!

Fault Finding & Repairs in Sydney
Power keeps tripping?Let's find out why.
When the power keeps tripping or part of the house goes dark, a quick reset isn't a fix. We trace electrical faults to their cause and repair them properly, so the problem doesn't keep coming back.
Licensed electrician
Electrical Licence 404255C
Cause found first
Not just the symptom
Tested & safe
Checked before we leave
Find the cause.
Fix it properly.
Tripping power, lights & power points
Electrical faults, traced to the source.
Electrical faults rarely fix themselves. A safety switch that keeps tripping, lights that flicker or a power point that's stopped working can point to a problem in an appliance, a fitting or the wiring itself, and some faults get worse over time.
We work through your circuits methodically, testing the wiring, fittings and connected appliances until we find what's causing the problem. Then we explain the cause in plain language and what it will take to fix, before we carry out the repair.
Before we leave, we test the repaired circuit and make sure everything is working as it should. If we notice anything else that needs attention, such as an old switchboard without enough safety switches, we'll let you know and talk through your options.
Licensed electrician. Repairs are carried out under Electrical Licence 404255C, and we provide the Certificate of Compliance for Electrical Work (CCEW) required in NSW.
Common faults we fix
Tripping safety switches
Power that keeps cutting out or won't reset
Flickering or dead lights
Lights that flicker, buzz or won't turn on
Faulty power points
Outlets that are dead, loose, hot or scorched
Partial power loss
Rooms or circuits that have lost power
Talk to an electrician
0414 281 358Monday–Friday, 7 am–5 pm. Emergency and after-hours call-outs when you need us, including weekends.
How the job runs
What happens when you call.
From your first call to a working circuit, here's what to expect.
Describe the problem
Tell us what's happening, when it started and which rooms or appliances are affected.
Find the cause
We test the circuits and fittings involved, then explain what we've found and how to fix it.
Repair & test
We repair the fault, test the circuit and make sure everything is safe to use.
Find the fault, then fix it properly.
Resetting a switch might get the power back on, but it won't stop the fault coming back. We test until we've found the cause, then repair it.
- Ask what happened, when it started and what was running at the time
- Test circuits, fittings and appliances to isolate the fault
- Explain the cause and the repair before any work begins
- Test the repaired circuit and check everything works before we leave
Google reviews
Reviews from homes we've worked in.
- Google
- Google
I've used a fair few electricians for work but I needed someone for my house. From the level of care of laying mats and cleaning up to the level of detail in measurements… the OCD itch was being scratched and the workmanship was spot on. Great pricing, great communication. I will be recommending and I already have.
- Google
Great service and easy to deal with. Jammie was professional, efficient and made sure everything was completed properly. He arrived on time and communicated well throughout the job. Very happy with the work and would definitely recommend. Thanks Jay-spark.
Frequently asked questions
Fault Finding & Repairs FAQs
A safety switch trips when it detects electricity leaking from a circuit, often because of a faulty appliance, water in an outdoor fitting or damaged wiring. It's doing its job, so don't keep resetting it. Unplug the appliances on that circuit and try once more. If it trips again, leave it off and get in touch.
Treat a burning smell, scorch marks, sparks, buzzing, or a power point or switch that feels hot as urgent. If it's safe to do so, turn off the power at the switchboard and stop using that circuit. If there's smoke or fire, get everyone out and call 000. Once everyone's safe, give us a call: we take emergency call-outs, including after hours and weekends.
Check whether your neighbours have power. If they don't, the problem is probably in the street supply, so contact your electricity distributor. If it's only your home, check the switchboard for a tripped switch, and call us if it won't reset, even after hours or on a weekend.
Resetting a tripped switch at the switchboard is fine, but leave anything more to a licensed electrician. In NSW it's illegal to carry out your own electrical wiring work, and it's dangerous to try.
Sometimes. Old fuse boards, and switchboards without enough safety switches, give your circuits less protection and can make faults harder to track down. If yours is due for replacement, see switchboard upgrades.
Other services

Got an electrical fault?
Get your electrical fault fixed.
Tell us what's happening and your suburb. We'll talk through the problem and arrange a time to find and fix the cause.